• 888-750-4777
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Adding association logo

Adding association logo 14 years 9 months ago #29932

How can I add home inspector association logo's or InterNACHI certification seal to my website?

Please Log in to join the conversation.

Re: Adding association logo 14 years 9 months ago #29933

Follow the tutorial on how to add the call now button in the tutorial section here on the board, just use the certification code instead.

Please Log in to join the conversation.

Dominic Maricic
Home Inspector Pro Home Inspection Software - CEO

Re: Adding association logo 14 years 9 months ago #29934

I tryed that, but I'm not sure where it went. I can't find it on my site.

Please Log in to join the conversation.

Re: Adding association logo 14 years 9 months ago #29944

Go back to blocks and look for the block you added it to. Then make sure to set the location and go to the bottom and submit.

Please Log in to join the conversation.

Dominic Maricic
Home Inspector Pro Home Inspection Software - CEO

Re: Adding association logo 14 years 9 months ago #29945

I would look but I don not know your site Bernie.

Please Log in to join the conversation.

<b>Title:</b> Orland Park Home Inspector
www.OrlandParkHomeInspections.com
<b>Des:</b> Orland Park Home inspector performs home inspections in Orland Park, Tinley Park, New Lenox, Frankfort, & Palos Heights. 708-535-6057, 708-612-6679
<b>UPath:</b>...

Re: Adding association logo 14 years 9 months ago #29959



OK. I did that, and now I have the actual code showing up on each page, still no logo.
Any ideas?
How do I insert a quote that I am replying to on the message board?

Please Log in to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.207 seconds
© 2004-2024 Home Inspector Pro Inc. All Rights Reserved.