• 888-750-4777
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
Welcome, Guest
Username: Password: Remember me

TOPIC: Basic single family residential template design

Basic single family residential template design 16 years 6 months ago #1007

I have started adjusting a template for basic single-family residential inspections.  I realized either I am not using the program effectively, or I need to make some major template outline changes.  For example, I want to be able to go room-by-room and detail each one individually including its bathroom, closet, etc...  With the templates available, there are general categories.  I find it hard to believe this is easier and more detailed to have a general category and then specify the location in your comments.  I realize the templates are just starting points, but I think I need to make some serious and time consuming template changes.  I was wondering if people had an opinion as to how I could effectively used the available templates without major template changes.  If anyone would like to share a template design that would be greatly appreciated.  I wish I had a design to offer as a swap, but I am just getting starting in the business.  Thanks for anyone's input.

Please Log in to join the conversation.

Last Edit: by Mark Mostrom.

Re: Basic single family residential template design 16 years 6 months ago #1008

Hi Mark,

The basic template provided is setup for simplicity. Only 20 tabs for three bathrooms, not 6, only 3 pages on he report, not 1.

Its easy to change this though. With the last basic version you'd have to copy sections semi-manually. With the latest you can go to edit template, tap on bathroom and click copy, and call it guest bath. Basically duplicating a section in seconds. This is a beta version but very stable and has beed in use by the beta tsting inspectors for 3 weeks now. Close the program and download it at www.homeinspectorpro.com/inspectionrepor...o-2_5_9_2-Update.exe

Please Log in to join the conversation.

Dominic Maricic
Home Inspector Pro Home Inspection Software - CEO

Re: Basic single family residential template design 16 years 6 months ago #1010

I appreciate your response.  I was hoping you would see my post.  I shut down HIP and downloaded the beta, but it gave me this message... Error opening file for writing.  What did I do wrong? 

Please Log in to join the conversation.

Last Edit: by Mark Mostrom.

Re: Basic single family residential template design 16 years 6 months ago #1011

Are you running the mac or windows version of the program? If windows, make sure the program is closed and run the update again, some file must have been stuck open.

Please Log in to join the conversation.

Dominic Maricic
Home Inspector Pro Home Inspection Software - CEO

Re: Basic single family residential template design 16 years 6 months ago #1012

Windows.  I will just shut down the computer a restart.  I tried three times already.  No worries.  I write back ASAP because I have some other questions if you have time.

Please Log in to join the conversation.

Re: Basic single family residential template design 16 years 6 months ago #1013

Im out running errands right now (hence the phone pic on this post). Let me know how it goes after you reboot. I'll be home in a bit ad can look at your computer remotely and see what's up.

Please Log in to join the conversation.

Dominic Maricic
Home Inspector Pro Home Inspection Software - CEO
Time to create page: 0.184 seconds
© 2004-2024 Home Inspector Pro Inc. All Rights Reserved.