TOPIC: GUI text not readable in buttons and labels

Why aren't all the text characters visible in the buttons and labels in the Inspector GUI, as shown in the attached jpg screenshot?
Thanks,
Paul

Win 7 Home Premium V 6.1.7601 Service Pack 1 Build 7601
HP Pavilion dm4 Notebook PC x64-based PC
Intel(R) Core(TM) i5 M 430  @ 2.27GHz, 2267 Mhz, 2 Core(s), 4 Logical Processor(s)
ATI Mobility Radeon HD 5450 ATI Mobility Radeon HD 5450 Display Adapter RAM 512.00 MB
Installed Drivers atiu9p64.dll, atiuxp64.dll, atiuxp64.dll, atiu9pag, atiuxpag, atiuxpag, atiumdva, atiumd6a.cap, atitmm64.dll
Driver Version 8.771.1.0 INF File oem50.inf (ati2mtag_ManhattanP_PXAI section)
Color Planes Not Available; Color Table Entries 4294967296
Resolution 1366 x 768 x 60 hertz; Bits/Pixel 32
Intel(R) HD Graphics (Core i5), ATI Technologies Inc. compatible Adapter RAM (340,860,928) bytes
Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Driver Version 8.771.1.0
INF File oem50.inf (iILKM1ML_PROXY section)
Home Inspector Pro Software v.3.2.4

Hi Paul,

It looks like you have your font size set above 100%. Go to control panel, display/resolution and set the text to 100% and see how it looks. Then you can try slightly increasing it to 110% to see if it still looks okay.

Hi Dominic,
Thanks for the prompt reply!
It was at the smallest (100%) but I have two dissimilar monitors and I think my system was confused. I changed to 125%, logged off and the app looked great! I reset it to 100% and all is well.
Thanks!
Paul