TOPIC: Report Template for single Family Dwelling

Hi Roger

I deal with the bathrooms like Dom said (above) 

I like to provide specific info on the usual trouble spots so that is why I use seperate bathrooms/ kitchens with specific comments. That way the client knows isues found in each bathroom without trying to discover which one is bath #1 #2 etc.  As for half baths just leave out the items not present or indicate not present.

As for bedrooms-- there are not so many things to point out so I cover them and the living room, dining room den etc. in the "other interior areas" section, like window hardware inoperative in master bedroom or fog in thermopane window in living room.

Cheers

I agree Doug. I like listing each bathroom separately. Dom has two easy ways to either add a bath on the fly or delete extra baths. I am thinking for my template I am going to set up two full baths and one half bath since that covers about 40% (the largest percentage) of the homes I inspect. Large homes I will add on the fly and smaller ones I will select not to print extra baths. In my area the realtors list 2 1/2 baths on the sales literature. If I say there are three baths (one being the half bath) I will get a phone call from some confused party. Thanks for your hel Doug.

Roger

Some people are really picky I Guess...
I've never had a problem like that ...but in my neck of the woods there are not so many lawsuits. 

Cheers

I was able to get your template into the program. But it does not open when I click on open it just shows me the client information page. How do I get to view the template?

Thanks

Its along the menu at the top of the program after Report Settings.

Thanks Dom.